5.0 procedure: 5.1 operating procedure of lab oven: 5.1.1 the lab oven is used for sterilization of sampling flasks, glassware and instruments (scissors, spatulas, and forceps etc.) at 181º c for 2 hours. 5.1.2 arrange petri plates in closed ss trays, instruments (pipette, scissors and forceps) in ss pipette jar.
Standard Operating Procedure (SOP) of OVEN. Procedure 1. Connect the power cable of the oven to the power outlet. 2. Ensure that the temperature setting potentiometer is set to a minimum. 3. Switch the On/Off key to the ‘ON’ position. 4. Adjust the temperature …
STANDARD OPERATING PROCEDURE JOUAN® LABORATORY OVEN Valid for: 2 years from approval Page 1 of 7 Table of Contents Page 1. Scope 2 2. Objective 2 3. Definitions 2 4. Responsibility 2 5. Procedure 3 6.
Temperature. Most laboratory ovens have a temperature range of just above ambient temperature to 300° C; those ovens which exceed this range are application specific. Ovens also have a temperature tolerance, which references the accuracy to which the oven preheats; increments of fractions of a single degree to tens of degrees are common.
calibrating ovensusedforstandard laboratory testing. This calibration procedure is limited to ovens operating to a maximum temperature of 300 °C. Ovens operating at higher temperatures require special handling and, there-fore,shouldbeperiodically checked by themanufacturer. 1.2 This procedure is to be used for periodic checks oflaboratory ovens.
Laboratory Oven Ask for Price Further, the presence of stainless steel finished inner chamber and perforated trays with mineral wool based space between inner chamber as well as outer walls also allows the system to offer optimum performance standards.
To describe the procedure for operation and calibration of the precision oven. 2.0 SCOPE This SOP is applicable for operation and calibration of the precision oven.